Having trouble turning on your Beats Solo Pro headphones? Don’t worry, we’ve got you covered.
In this article, we’ll guide you through some troubleshooting steps to get your headphones up and running again. From performing a factory reset to checking basic settings and ensuring proper charging, we’ll walk you through each step.
So, if you’re ready to bring your Beats Solo Pro headphones back to life, let’s get started.
Perform a Factory Reset
To solve power, charging, sound, and connection issues with your Beats Solo Pro headphones, you can perform a factory reset. Simply press and hold the Mode Button and Volume Down Button until the LED indicator light flashes red. This will reset your headphones to their original settings and may resolve any problems you are experiencing.
After the reset, make sure to reconnect your Beats to your Bluetooth device and re-enter any settings that were previously configured.
It’s important to note that performing a factory reset will erase any saved preferences or customized settings you had on your headphones. However, this step can be helpful in troubleshooting and getting your Beats Solo Pro headphones back to working properly.
Check Basic Troubleshooting Steps
Make sure to fold and unfold the earcups to power the Beats Solo Pro earbuds on and off. This simple step is often overlooked but can easily solve the issue of the headphones not turning on.
Check if the earcups are properly unfolded to activate the power, and fold them to turn off the earbuds. Additionally, look for the power indicator on the right earcup to ensure that the headphones are actually on.
If the earbuds still won’t turn on, make sure that the battery is charged, even if not fully. Connect the charging cable securely and observe the LED indicator lights during charging.
If all else fails, consider performing a factory reset or contacting the dealer or Beats Online Support for further assistance.
Reset Beats Solo Pro Headphones
Press and hold the Mode Button and Volume Down Button simultaneously to reset your Beats Solo Pro headphones. This is a simple troubleshooting step that can help resolve various issues such as power, charging, sound, and connection problems.
When you press and hold both buttons, the LED indicator light on your headphones will flash red, indicating that the reset was successful.
After resetting, make sure to reconnect your Beats to your Bluetooth device and re-enter any necessary settings.
If you’re still experiencing issues with your Beats Solo Pro headphones, it may be helpful to refer to other troubleshooting guides or contact the dealer or Beats Online Support for further assistance.
Troubleshoot Beats Solo Pro Earbuds
Check if the earcups are unfolded to power on and folded to power off your Beats Solo Pro earbuds. Sometimes, the simplest solution is the most effective.
Ensure that the earcups are in the correct position to turn on or off your earbuds. Look for the power indicator on the right earcup to confirm if the earbuds are powered on.
Additionally, make sure that the battery is charged, even if it’s not fully charged. You can verify if the headphones are actually charging by observing the LED indicator during the charging process. The 5 fuel gauge lights should flash while charging and remain on when fully charged.
Charge the headphones for at least 2 hours or longer to ensure they have enough power.
Verify Charging for Beats Solo Pro
To ensure a successful charging process for your Beats Solo Pro earbuds, follow these steps:
-
Make sure that the charging cable is securely connected on both sides. Double-check the connection to both the earbuds and the power source.
-
Observe the LED indicator on the earbuds. While charging, the indicator should flash to indicate that the battery is being replenished.
-
Remember to charge the headphones for at least 2 hours or longer to ensure a full charge. During this time, the five fuel gauge lights should flash, indicating the charging progress.
-
Once fully charged, the lights will remain on.
If you encounter any issues with the charging process or if the earbuds still won’t turn on after charging, it may be necessary to contact the dealer or Beats Online Support for further assistance.
Ensure Beats Solo Pro Is Not Actually on
Make sure you have increased the volume on your connected device and the music software to ensure that the Beats Solo Pro earbuds are not actually on. Sometimes, when the volume is set too low or muted, it can give the impression that the earbuds are not turning on. By increasing the volume, you can confirm if the earbuds are indeed off.
Additionally, check if there is any audio playing through the connected device. If there is no sound, it is likely that the earbuds are not on.
Also, make sure that the earbuds are properly paired and connected to your device. Refer to the instructions on how to pair Beats Solo Pro headphones for assistance.
Next Steps if Troubleshooting Fails
If the previous troubleshooting steps do not resolve the issue, you should consider contacting the dealer or reaching out to Beats Online Support for further assistance. They have experts who can provide you with personalized guidance to solve the problem.
Explain the steps you have already taken and any error messages you encountered. They may be able to offer additional solutions or suggest sending the headphones for servicing or replacement if necessary. Remember to have your proof of purchase ready, as it may be required for warranty purposes.