reset-jabra-elite-active-65t

Are you having trouble with your Jabra Elite Active 65T wireless earbuds? Don’t worry, we’ve got you covered!

In this simple guide, we will show you how to reset your earbuds to fix common issues like connectivity problems, sound quality, or charging difficulties. Just follow these easy steps.

Step 1: Turn on the Right Earbud

To begin resetting your earbuds, ensure that you turn on the right earbud. Once it’s powered on, press and hold the multifunction button for about 10 seconds. You’ll notice that the LED indicator light starts flashing red, then purple, indicating a successful reset.

After that, it’s time to reconnect your earphones to your Bluetooth device. But before doing so, make sure to delete or forget the Elite Active 65T from the Bluetooth screen. This will ensure a clean re-pairing process.

Resetting your Jabra Elite Active 65T earbuds can be helpful in resolving various issues such as difficulty connecting to devices, frequent loss of connection, charging or powering on problems, sound quality issues, and recurring problems that can’t be fixed.

Step 2: Press and Hold the Multifunction Button for 10 Seconds

Press and hold the multifunction button on your right earbud for about 10 seconds to initiate the reset process. This button is located on the front surface of the earbud, near the top.

While holding the button, you will notice the LED indicator light on the earbud flash red and then purple. This indicates that the reset process has been successfully initiated.

Once the reset is complete, you will need to reconnect your earphones to your Bluetooth device. Before doing so, make sure to delete or forget the Elite Active 65T from the Bluetooth screen on your device.

Resetting your Jabra Elite Active 65T wireless earbuds can help resolve various issues such as difficulty connecting to devices, frequent loss of connection, charging or power problems, sound quality issues, and recurring problems that cannot be fixed.

Step 3: LED Indicator Light Flashes Red and Purple

While holding the multifunction button, you will see the LED indicator light on your right earbud flash red and then purple, indicating that the reset process has been successfully initiated.

This step is crucial in resetting your Jabra Elite Active 65T wireless earbuds. By pressing and holding the multifunction button for about 10 seconds, you activate the reset mode. The LED indicator light will confirm this by flashing red and then purple.

This reset process is necessary when you encounter difficulties connecting your earphones to devices, experience frequent loss of connection, face issues with charging or powering on, or notice problems with sound quality, delays, or distortion.

It’s a simple and effective way to troubleshoot recurring problems that can’t be fixed through other means.

Step 4: Reconnect the Earphones to Your Bluetooth Device

After the successful reset, you can now reconnect your earphones to your Bluetooth device. To do this, follow these steps:

  1. Turn on your Bluetooth device and make sure it is in pairing mode.
  2. On your earphones, press and hold the multifunction button for a few seconds until the LED indicator light starts flashing.
  3. Open the Bluetooth settings on your device and select the Jabra Elite Active 65T from the list of available devices.
  4. If prompted, enter the passcode or PIN to complete the pairing process.
  5. Once connected, you will hear a confirmation sound in your earphones.
  6. Test the connection by playing some audio on your device.

If you encounter any issues during the reconnection process, refer to the troubleshooting steps mentioned earlier or reach out to Jabra’s online support for further assistance.

Enjoy your wireless listening experience!

Step 5: Delete/Forget Elite Active 65T on the Bluetooth Screen

Now that you’ve successfully reconnected your Jabra Elite Active 65T earphones to your Bluetooth device, the next step is to delete or forget the Elite Active 65T from the Bluetooth screen.

This is an important step to ensure a clean and fresh connection between your earphones and your device.

To do this, simply go to the Bluetooth settings on your device and locate the Elite Active 65T on the list of paired devices. Then, tap on the option to forget or delete the earphones.

This will remove any previous connection data and prepare your earphones for a new pairing.

By deleting or forgetting the Elite Active 65T on the Bluetooth screen, you can ensure a smooth and trouble-free connection when you re-pair your earphones.

So go ahead and complete this step before moving on to enjoy your Jabra Elite Active 65T wireless earbuds.

Basic Troubleshooting Tips for Jabra Elite Active 65T Earbuds

To troubleshoot your Jabra Elite Active 65T earbuds, follow these steps:

  1. Make sure they’re turned on, charged, and connected to your device with Bluetooth enabled.

  2. If you’re experiencing difficulty connecting to devices or frequent loss of connection, try these basic troubleshooting tips:

  • Ensure that both your earbuds and device are turned on and fully charged.
  • Check that Bluetooth is enabled and not in Flight mode.
  • Maintain a reasonable range between the earbuds and device to ensure a stable connection.
  • Confirm that audio is playing and adjust the volume controls as needed.
  • Make sure your earbuds are not paired with any other devices.
  1. If these steps don’t resolve your issue, you can try the following:
  • Un-pair and re-pair the headphones and device.
  • Restart your device.
by Adrian
Leave a comment